Applied to

All EverFocus’ IP Speed Dome Cameras


You may need to force the IP speed dome camera turn to the previous position when some external factors cause the IP speed dome camera turn to the unwanted position.

EverFocus’ IP Speed Dome cameras can be set up with up to 192 preset positions. And some preset numbers are fixed for factory-determined actions, e.g. the Preset number “94” is fixed for “Back to the previous position”.

To direct the IP Speed Dome camera to the previous setup position:
1. On the Live View window of the IP Speed Dome camera, click the Open button to bring up the PTZ Control panel.

2. On the PTZ Control panel, click the Preset button, enter “94” using the numeric buttons on the panel, and click the
Go button. The camera will turn to the previous position.